Button Sew-On Program - Bernina Artista 200 Manual

Button Sew-on Program

Stitch width:
Feed dog:
Presser foot:
132
Buttonholes – Applications
Stitch: Button sew-on program No. 60
depends on the distance between the holes
Needle: size and type suitable for the fabric selected
Thread: cotton or polyester
down (darning position)
Button sew-on foot No. 18
Note:
Buttons with 2 and 4 holes can be attached
with presser foot No. 18. The shank (thread
length between button and fabric) can be
made shorter or longer as desired. Buttons
sewn on for decorative purposes only are
stitched without a thread shank.
Button Sew-on Program
Sewing 2 Hole Button
•
Sewing 4 Hole Button
Beginning and Ending Threads
For Secure Results
TIPS
Sewing on buttons
A real time saver, especially when several of the same type
buttons must be sewn on, e.g. blouses, bedding, etc.
For work which is subject to heavy wear or washing, sew Button
sew-on program twice.
030794.71.04_0401_a200_EN
select stitch No. 60 on the screen
select Button sew-on program No. 60 on the screen
check distance between holes with the handwheel and adjust
stitch width if necessary
hold the threads when starting to sew
sew on button
the sewing computer stops automatically when program is
completed and is immediately ready for the next button
sew the front holes first
carefully move the button forward
sew the back holes with the same program
the threads are secured and can be trimmed
pull both bobbin threads until the ends of the upper thread
are visible on the wrong side (knot if required)
trim threads