Motif Properties
with the Motif Properties function the following
•
is possible:
altering the stitch density of stitch types
•
Pull Compensation: adjusting excessive
•
spacing/overlap of motif
Run Length: altering outline length
•
touch symbol
a special display appears
•
alter stitch density (satin stitch, step stitch,
decorative stitch fills (Fancy Fill))
touching «+» increases the stitch density
•
touching «–» reduces the stitch density
•
display of the alteration in percent (%)
•
adjusting Pull Compensation
touching «+» increases the Pull Compensation
•
value to decrease excessive spacing between
objects and/or outlines caused by the push and
pull effect of fill stitches
touching «–» decreases the Pull Compensation
•
value to eliminate excessive overlap of objects
and/or outlines caused by the push and pull
effect of fill stitches
display of the alteration in 1/10 millimeter (mm)
•
altering Run Length (outline)
lengthen Run Length by touching «+»
•
shorten Run Length by touching «–»
•
confirm entry by touching «OK»
display of the alteration in 1/10 millimeter (mm)
•
202
The Embroidery Computer – On-screen Functions and Displays
touch symbol
a special display appears
•
to insert lettering touch the Text bar
a screen with a keyboard appears
•
to change the alphabet type scroll next to the
Alphabet symbol
the alphabet type changes in the display
•
to alter lettering size scroll with arrows next to
the Height box
alteration is shown in milimeter (mm)
•
to change the baseline type of lettering touch the
desired on-screen button
horizontal baseline
•
circle counter clockwise produces lettering below
•
the curved baseline (three different forms of
arched lettering are possible, the larger the green
circle the less the arch)
circle clockwise produces lettering above the
•
curved baseline (three different forms of arched
lettering are possible, the larger the green circle
the less the arch)
vertical baseline
•
use up or down arrows to change letter spacing
in mm steps between letters
Note:
The last activated function in Edit 2 (Move Motif, Rotate
Motif, Rescale Motif Height or Width and Rescale Motif
Proportionally) can still be changed when switching
back to Design Menu Edit 1.
030794.71.04_0401_a200_EN
Letter Manipulation
To Next Page - Edit 1
touch symbol
Design Menu Edit 1 appears
•