Inserting The Bobbin; Threading The Upper Thread - Bernina Artista 200 Manual

Inserting the Bobbin

Inserting the Bobbin
insert the bobbin so
that the thread runs
clockwise

Threading the Upper Thread

A
C
D
E
14
The Sewing Computer – Operating Instructions
Pulling the Thread
Into the Slot
pull the thread
counter clockwise
into the slot
B
030794.71.04_0401_a200_EN
Pulling the Thread
Under the Spring
pull the thread to the
left under the spring
until it lies in the
T-shaped slit at the
end of the spring
Attaching the Thread Spool
raise the needle and presser foot
turn the power switch to «0» (off)
attach foam pad
place spool on pin (spool turns clockwise)
attach the appropriate spool disc - diameter of
spool is disc size
take thread through rear guide A
then into slit of upper thread tension
Down
pull thread down to the right of the take-up
cover to B
Up
take thread up to the left of the cover to C in
the direction of the arrow, placing it in the
take-up lever
Down
take thread down and through guides D and E
!
Refer to the safety instructions!
Clockwise Turning of
the Bobbin
the bobbin must turn
•
clockwise when the
thread is pulled