Bernina Artista 200 Manual page 242

In General
Motifs from the embroidery computer, personal
design cards, CD-ROMs or the myartista Portal, as
well as motifs created in the BERNINA artista
software, can be combined, rearranged, and
altered in different ways, then saved.
Motifs can either be saved to the embroidery
computer or on a personal design card.
Open desired motif from embroidery computer,
personal design card or peripheral source.
Alter or combine motif if desired.
Saving Motifs
Saving to the Embroidery Computer
Note:
In a saved stitch combination, individual
stitches can be altered after being selected.
240
Saving and Deleting Motifs – Saving Motifs
The embroidery computer has a memory system,
i.e. both the sewing stitch combinations and
embroidery «My Designs» are saved in this system.
Since the memory space is not sub-divided into
fixed spaces, any desired number of motifs can be
stored as long as enough free memory is still
available. If there is not enough memory space,
other motifs and/or stitch information must first
be deleted.
Note:
Motifs which have been altered in terms of
size, stitch density, etc. and saved, will be
regarded as a new motif when subsequently
selected. (That is why all percentages say
100%, and the original alteration(s) is/are no
longer visible.)
open desired motif from embroidery computer, personal
design card or peripheral source
alter or combine motif if desired
touch «Save» in the Design Menu Edit 1
motif to be saved is displayed as «untitled» on left of screen
•
the Embroidery Computer button from the Selection menu
•
is activated
the folder My Designs will open automatically
•
the System Memory Capacity (Free Capacity) is shown in
•
percentage (%) in a bar above the folders
select motif to be saved
030794.71.04_0401_a200_EN