Bernina Artista 200 Manual page 206

Design Menu Edit 1
touch symbol
the screen changes from the
•
Embroidery menu (Ready) to the Design
Menu Edit 1
Embroidery Speed
touch symbol one or more times
the desired speed will be selected
•
the bar on the symbol shows the
•
alteration
reduces or increases the Embroidery
•
Speed proportionally
touch the symbol longer and the
default speed (4/4) is set again
Single/Multi Color Motif
touch symbol
if the symbol is active, the complete
•
motif will be embroidered in one color
(without stopping)
if the symbol is inactive, the colors will
•
be embroidered individually
Embroidery Sequence Control
(i.e. thread breakage)
touch symbol
the Information Area for operating the
•
stitch width knob appears
to check the embroidery sequence of
the motif in stages turn stitch width
knob
the needle follows the embroidery
•
sequence in small steps
to follow the embroidery sequence
forwards, turn the stitch width knob
clockwise
to follow the embroidery sequence
backwards, turn the stitch width knob
counter clockwise
the number in the Information Area
•
shows the stitch count of the
embroidery sequence
to reactivate the default setting touch
the purple knob icon
Move Hoop
touch symbol
the Information Areas for operating the
•
stitch width and stitch length knob
appear
if the fabric of a large motif has to be
•
rehooped (e.g. lettering, border, etc.),
the hoop can be moved to the last
stitch of the already embroidered part
of the motif by turning the knobs
204
The Embroidery Computer – On-screen Functions and Display
1 1 3 4
/ , / , / , /
4 2 4 4
030794.71.04_0401_a200_EN
«?» (Help)
touch symbol and select a function
the explanation for the selected
•
function appears
close with «ESC»
Bobbin Thread Length
When the Bobbin Thread Length
•
runs low the embroidery computer
stops and the following message
appears: «Please check lower
thread»
as long as the message is visible, the
•
lower thread control is turned off
and embroidering can continue
if the message is closed with «OK»
•
the lower thread control is active
again