Automatic Darning - Bernina Artista 200 Manual

Automatic Darning

Quick Darning of Holes or Worn Areas
Stitch:
Needle:
Thread:
Feed dog:
Presser foot:
Note:
The Simple darning program No. 22 can also be done with the
Automatic buttonhole foot No. 3A (see following description).
TIP
If the darning does not cover the whole worn or
damaged area
Reposition the work under the foot to continue covering
the worn or damaged area. Begin sewing; the program
will repeat as often as desired (the length is saved).
Simple darning program No. 22,
Reinforced darning program No. 23
size and type suitable for the fabric selected
lightweight darning thread
up (sewing position)
Automatic buttonhole foot No. 3A,
Reverse pattern foot No. 1C (only for Darning
program No. 22)
Simple Darning Program No. 22
replaces threads along the lengthwise grain in all fabrics
Preparation
use Reverse pattern foot No. 1C
select Stitch Counter icon on the toolbar on the lower
part of the screen
place a piece of lightweight stabilizer under the worn
area before darning if necessary
Sewing
sew the first row and stop
press and release the Quick Reverse button at the
desired length; this programs the first length
continue sewing; the sewing computer stops
automatically
Reinforced Darning Program No. 23
replaces threads along the lengthwise and crosswise
grains in all fabrics
Preparation
use Automatic buttonhole foot No. 3A
place a piece of lightweight stabilizer under the worn
area before darning if necessary
Sewing
insert the needle in the top left of the worn area
sew the first vertical row
press and release the Quick Reverse button at the
desired length; this programs the length needed
continue sewing; the sewing computer stops
automatically when finished
030794.71.04_0401_a200_EN
TIP
If the darning becomes distorted
Correct with the Balance function see
page 177.
Practical Stitches – Applications
67