Bernina Artista 200 Manual page 254

BERNINA Computer System
Connect peripherals (special accessories) to turn your artista 200 embroidery computer into an
embroidery computer system, and take your hobby to unlimited heights of creativity.
In addition to a direct connection with the myartista Portal (information source), which takes you to the
Portal site especially created for the embroidery computer, it is also possible, for instance, to get extra
motifs from a BERNINA CD-ROM.
Ask your BERNINA dealer for more information.
Peripherals
The following external devices can be connected
to the artista 200 embroidery computer:
BERNINA Modem
•
BERNINA CD-ROM drive
•
External Devices
252
Peripherals and Accessories – External Devices
Note:
All peripherals are special accessories,
depending on country. Ask your BERNINA
dealer for information!
Modem
(for access to myartista Portal)
The BERNINA Modem enables direct access to the myartista
Portal (information source) where the special Portal pages,
programmed for the embroidery computer alone, can be called
up onto the artista 200 screen.
In the myartista Portal you will find various embroidery designs
categorized by hoop size which can be downloaded to the
embroidery computer.
Making a connection
connect Modem
touch «Portal»
confirm message about connecting with «Yes»
when the connection to the Provider is made, then confirm the
message that appears with «OK»
select the desired hoop from the now opened screen
the embroidery motif overview for the corresponding hoop size
appears
The content of the myartista Portal is continuously updated.
030794.71.04_0401_a200_EN