All stitches are checked and fully adjusted before the sewing computer leaves the factory.
Different fabrics, threads, stabilizers and interfacings can affect programmed stitches so that sometimes
they might not close or they might overlap, i.e. the stitches that make up the pattern are too close
together or too far apart.
These effects can be corrected with the electronic Balance so that the stitch formation can be adjusted
where necessary to suit the fabric.
Balance for Practical and Decorative Stitches 9mm
When sewing soft fabrics such as jersey or tricot, the fabric tends to stretch under the presser foot which
also stretches the stitch being sewn. For example, the Honeycomb stitch opens up and is too long.
Thicker fabrics might cause the stitch to overlap, making it too short. Correcting with the Balance is very
easy.
Opening Balance
touch the function «Balance»
Saving and Closing Screen
touch «OK»
the corrections will be saved and the Balance screen will close
•
Deleting Corrections
touch «Reset»
the corrections of the selected
•
stitches will be deleted
Closing Screen
touch «ESC»
the Balance screen closes; returns to previous screen
•
Balance Screen
the special Balance screen opens
•
in the left portion of the screen the stitch is displayed in its
•
original form
in the right portion of the screen the alterations made are
•
directly visible
the corrections can be made while sewing (with opened
•
screen)
Corrections
the stitch sewn on the fabric (e.g. the Honeycomb stitch)
•
opens up and it does not look correct:
turn the stitch length knob (displayed by a purple symbol on
the screen) until the stitch in the right portion of the screen is
identical with the stitch on the fabric
Sewing and Sewing Computer Support – Balance
030794.71.04_0401_a200_EN
Balance
177