Bernina Artista 200 Manual page 183

182
Sewing and Sewing Computer Support – Messages
Messages
The BERNINA Modem cannot be identified. Please insert the
•
Modem and try again.
Cannot dial, please check the phone line and then dial number.
•
The authentication for the provider failed. Please check the user-
•
name and the password.
The communication with the provider was interrupted. Please try
•
later or use another provider.
An unknown error occurred with the Modem. Please try again.
•
You cannot save or delete files on the myartista Portal.
•
A problem occurred in communicating with the myartista Portal.
•
Please try again.
To keep your sewing/embroidery computer performing at its best,
•
it's time to complete the following tasks. Remove thread and lint
from beneath the stitch plate, as well as from the feed dog area.
These instructions can be found on page 179 of the manual.
It's time for your regular service check. Please contact your
•
BERNINA dealer for an appointment.
You have opted not to take your sewing/embroidery computer to
•
your BERNINA dealer for its service check. This message will not
appear until it's time for the next regular service.
Please insert CD-ROM containing video tutorials and press «OK».
•
CD-ROM NOT working!
•
Main Motor failed. Please check hook system.
•
030794.71.04_0401_a200_EN