Stitch Counter
touch symbol
when the desired length is reached (e.g.
first buttonhole bead or straight stitch),
press the external Quick Reverse button
the display (or indicator) changes to
•
«auto» (for the buttonhole, only after
length of second bead is determined by
pressing the Quick Reverse button)
the selected stitch is programmed
•
(temporarily)
Save
touch symbol
saves stitch combinations and letters
•
Delete
touch symbol
deletes individual stitches or letters
•
above the cursor
deletes stitch combinations
•
deletes "Drawers" content
•
Combination Sub-divider (1)
touch symbol
each combination can be sub-divided
•
into several parts
each combination part is totally
•
independent of one another
Combination Sub-divider (2)
touch symbol
each combination can be sub-divided as
•
desired
after stop press the foot control and the
•
next part is sewn
Alphabet Size
when an alphabet is selected the size is
•
9mm (field with 1 is blue)
touch symbol
size will be reduced to 6mm (field with
•
2 is blue)
Monogram Size
when a monogram is selected the size is
•
30mm (field with 1 is blue)
touch symbol once or twice
the blue field shows the selected size:
•
1 = 30mm (standard)
2 = 20mm
3 = 15mm
Multifunction Button
(only available in Combi Mode)
touch symbol
a special screen with further functions
•
opens:
•
•
•
•
Direct Entry Length (in mm) or
On-screen Button Measurement
touch symbol
buttonhole length (number in mm) can be
•
entered directly by the stitch width knob
for measuring the button, hold button to
bottom lower left corner of screen and
enter button length = adjust blue circle to
button size using stitch width knob
2mm for the button thickness will be
•
added automatically (with button
measurement only)
Programming Buttonhole Length
symbol is automatically highlighted in
•
blue (= active) when a buttonhole is
selected
using the Quick Reverse button on head
•
frame a buttonhole length can be
determined directly
when the buttonhole is programmed the
•
symbol is turned off (inactive, yellow)
if a new length is to be programmed the
•
symbol has to be re-selected
Manual 4 or 6 Step Buttonholes
touch symbol
a special screen appears
•
sew manual buttonhole in 4 or 6 steps
(according to buttonhole type)
Needle Stop Adjustment
touch the needle stop symbol
arrow points down on screen (field is
•
highlighted in blue)
the sewing computer always stops with
•
the needle down
touch symbol again = needle stop reverts
to up
Upper Case / Lower Case
Upper Case is activated when Alphabet is
•
selected
touch symbol
Lower Case is activated
•
The Sewing Computer – On-screen Functions
030794.71.04_0401_a200_EN
Delete Combination
Save Combination
Mirror Combination
Preview
31