Programming And Saving - Bernina Artista 200 Manual

In General
Stitches, letters, and numbers can be combined
and stored in the memory system. The sewing
computer has a memory system, in which the two
memories – sewing and embroidery – can be
stored. The storage space is not sub-divided into
fixed spaces, i.e. any number of stitch combina-
tions can be stored in the Drawers as long as there
is free storage space

Programming and Saving

Programming and Saving Stitch Combinations
154
Saving and Deleting Stitches and Stitch Combinations – Programming and Saving
(capacity) available. It may well be, however, that
not all Drawers can be filled, due to the saving of
many stitches or stitch combinations.
The memory is a long term memory, i.e. the
contents remain in it until deliberately deleted.
A power cut, or switching off («0») the sewing
computer do not affect the saved program.
Programming and Saving Stitches
select Combi Mode
the Stitch Altering Area appears with its functions
•
select desired stitch
alter stitch length, stitch width, needle position or
functions such as mirroring, etc. if necessary
select further stitches
touch the Multifunction button
touch «Save Combination» to save the combination
select the Drawer where you wish to save the stitch
combination
the System Memory Capacity (Free Capacity) is
•
shown in percentage (%) in a bar above the
Drawers screen
030794.71.04_0401_a200_EN