8
8.1 Error messages
Message on the Display
Errors and Faults
Cause
The selected needle and stitch
plate cannot be used in
combination.
The needle is not at its top end.
The upper thread is used up.
The upper thread has broken.
The bobbin thread is used up.
The bobbin thread has broken.
The main motor is not running.
The fabric under the presser foot
is too thick.
Solution
> Replace the needle.
> Replace the stitch plate.
> Adjust the needle position via the handwheel.
> Rethread.
> Rethread.
> Rethread.
> Clean the hook.
> Rethread.
> Turn the handwheel clockwise until the needle is at its
top position.
> Remove the sewing project. Do not pull on the fabric or
the thread.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken needle points on the magnetic back of
the hook.
> Insert the hook correctly.
> Reduce the fabric thickness.
Errors and Faults
89