18 Errors and Faults
18.1 Error messages
Message on the Display
Cause
Stitch number unknown.
Selection of stitch patterns not possible in Combi-
mode.
The feed dog is not lowered.
The selected needle and stitch plate cannot be
used in combination.
The needle is not at its top end.
The upper thread is used up.
The upper thread has broken.
The bobbin thread is used up.
The bobbin thread has broken.
Errors and Faults
Solution
> Check the entry and enter the new
number.
> Combine other stitch patterns.
> Push the button «Feed Dog Up/Down» to
lower the feed dog.
> Replace the needle.
> Replace the stitch plate.
> Adjust the needle position via the
handwheel.
> Rethread.
> Rethread.
> Rethread.
> Clean the hook.
> Rethread.
173