Specifying Monogram Attributes; Editing Monograms - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 163 Thursday, July 8, 2004 11:59 AM
Layout & Editing
8.
Click a decorative pattern to select it, and then
click Select (or double-click the pattern) to
close the Browse dialog box and display the
pattern in the preview window.
9.
After selecting the desired settings, click OK.
→ The monogram is displayed in the Design
Page with the selected decorative pattern.
b
Memo:
To quit the operation, click Cancel.
Specifying monogram
attributes
■
Monogram Font
Use this selector to select a font for the monograms.
b
Memo:
The Monogram Font selector appears in the
Sewing Attributes bar when
Tool Box is selected. It also appears when a
monogram in the Design Page has been
selected.
1.
Click in the Font selector.
→ A list of monogram fonts appears.
Monogram font
name
!!sew37.bmp!!
on the
Monogram font sample
Editing Embroidery Patterns
2.
Click the desired font.
→ The setting is applied to all monogram
patterns that you will create, until the set-
ting is changed.
→ If a monogram was selected, the setting is
also applied to the selected monogram.
■
Monogram Size
Use this selector to select the size of the monogram.
b
Memo:
The Monogram Size selector appears in the
Sewing Attributes bar when
Tool Box is selected. It also appears when a
monogram in the Design Page has been
selected.
1.
Click in the Monogram Size selector.
2.
Type the desired height (5 to 100 mm (0.20 to
3.93 inches)) and press the
click the desired value.
→ The setting is applied to all text patterns
that you will create, until the setting is
changed.
→ If a monogram was selected, the setting is
also applied to the selected monogram.

Editing monograms

A monogram that has been entered can easily be
edited.
1.
Select the monogram that you want to edit.
a
Note:
You cannot edit more than one monogram at
a time. If you select more than one
monogram, this menu command is not
available.
on the
Enter
key, or
163