Using The Sewing Attributes Bar - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 87 Thursday, July 8, 2004 11:59 AM
Design Center
→ The Sewing Attribute Setting dialog box
for the selected outline or portion of out-
line appears.
b
Memo:
• An alternate method is to select the menu
command Sew – Setting Attribute, or
click the Toolbar button indicated below.
• The Sewing Attributes bar shows the color
and sew type for the selected outline. At
this time, you can change the color and
sew type for the entire outline, or the sew
type for the portion of the outline. For more
details on changing the color and sew
type, refer to "Color" on page 89 and "Sew
type" on page 89.
3.
If necessary, change the settings in the
Sewing Attribute Setting dialog box.
b
Memo:
To return to the default setting, click
the right of the setting.
c
"Specifying sewing attributes" on page 89
4.
To apply the new attributes to the outline or
portion of outline, click the outline where you
want to apply the new attributes.
5.
Click Close to close the dialog box.
The Sewing Attributes bar, available in stage 4 (Sew
Setting stage), allows you to set the color and sew
type of region and outlines.
The sewing attributes that are available depend on
the tool selected in the Tool Box.
Example 1: When
Example 2: When
selected
When the pointer is positioned over a button or
selector in the Sewing Attributes bar, a label
indicating the name of that element appears.
Sewing Attribute
■
at
Clicking this button switches on/off sewing for a
region.
1.
Stage 4 (Sew Setting Stage)

Using the Sewing Attributes bar

on the Tool Box is selected
or
Region sew: Switches
on/off sewing for the
region.
Line sew: Switches
on/off sewing for the
line.
Region color, Line
color: Click this button
to set the thread color
for lines or regions.
Region sew type,
Line sew type: Use
!!sew4.bmp!!
these selectors to set
the sew type for lines
or regions.
Region sew
b
Memo:
• The Region sew button is available only
when on the Tool Box is selected.
• When region sewing is switched off, the
region is not sewn (and you cannot set a
color or sew type).
Click .
This button has two settings:
on the Tool Box is
page
87
page
88
page
89
page
89
87