Step6 Transferring The Pattern To An Original Card - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 62 Thursday, July 8, 2004 11:59 AM
An alternate method is to click the Toolbar
button indicated below.
→ If the pattern has already been saved at
least once, the file is saved immediately.
b
Memo:
To save the file with a different name, use the
menu command File – Save As instead.
→ If no file name has been specified or if the
file cannot be found, the Save As dialog
box appears.
2.
Select the drive and the folder, and then type
in the file name.
3.
Click Save to save the pattern.
b
Memo:
• All patterns for a divided embroidery
pattern are saved as a single .pes (version
6) file.
• Only the sections that contain stitching are
saved.
• To quit the operation, click Cancel.
• If a file already exists with the name
specified in the Save As dialog box, the
following message appears.
• To overwrite the file, click Yes. The
new file name appears in the title bar
of the Layout & Editing window.
• If you do not want to overwrite the
existing file, click No. You can then
enter a different file name.
62
Creating Large-Size Embroidery Patterns
Save
a
Note:
If a section of the pattern exceeds the
maximum allowed for the stitch count or
number of colors, a message appears,
describing the limitations and asking
whether or not the pattern should be saved
anyway. If the embroidery pattern extends
off the Design Page, a message appears,
asking whether or not the pattern should be
saved anyway. If the pattern is saved
anyway, it must be edited before it can be
sewn.
Step 6
Transferring the pattern to an
original card
This embroidery pattern can be transferred to a
sewing machine, where it can be sewn. Transfer
the embroidery pattern to the sewing machine
using media of the type used by your machine, for
example, original cards, floppy disks,
CompactFlash cards, or USB media. For this
example, we will transfer the pattern to an original
card.
1.
Insert an original card into the USB card writer
module.
a
Note:
The original card is inserted correctly when
you hear it snap into place.
2.
Click File on the menu bar, point to Write to
Card, and then click Current Design on the
submenu.
An alternate method is to click the Toolbar
button indicated below.
→ The following message appears.
a
Note:
If the original card already contains patterns,
they will be deleted.
Write to Card