Brother PE-Design 6.0 Instruction Manual page 74

PeDesignV6Eng.book Page 66 Thursday, July 8, 2004 11:59 AM
3.
Embroider the selected pattern.
4.
Remove the embroidery hoop from the sewing
machine, and then remove the fabric from the
hoop.
5.
Hoop the fabric for the next pattern section.
(For details, refer to "Hooping the fabric" on
page 65.)
b
Memo:
When an embroidery pattern created in a
custom Design Page is saved or transferred
to an original card, alignment stitching (single
lines of running stitches with the color NOT
DEFINED, with a pitch of 10.0 mm, and
starting with securing stitches with a pitch of
0.3 mm) is added at the edges of the pattern
sections. (The alignment stitching appears in
the print preview and is printed in red.)
Example for hooping fabric using the
alignment stitching with Largelace.pes
(Largelace.pes can be found in the Data
folder.):
1) Embroider the upper-left pattern
section.
→
Alignment stitching is sewn below
and on the right side of the
embroidered pattern section.
2) Hoop the fabric for the upper-right pattern
section with the left side of the hoop
aligned on the alignment stitching on the
right side of the pattern section sewn in
step 1, and then embroider the pattern.
→
Before the pattern section is
embroidered, alignment stitching is
sewn on the left side. Make sure that
this alignment stitching aligns with the
alignment stitching sewn in step 1.
After the pattern section is
embroidered, alignment stitching is
sewn below the pattern section.
66
Creating Large-Size Embroidery Patterns
3) Hoop the fabric for the lower-left pattern
section with the top of the hoop aligned
on the alignment stitching at the bottom
of the pattern section sewn in step 1,
and then embroider the pattern.
→
Before the pattern section is
embroidered, alignment stitching is
sewn at the top. Make sure that this
alignment stitching aligns with the
alignment stitching sewn in step 1.
After the pattern section is
embroidered, alignment stitching is
sewn on the right side of the pattern
section.
4) Hoop the fabric for the lower-right pattern
section with the left side of the hoop
aligned on the alignment stitching on the
right side of the pattern section sewn in
step 3 and with the top of the hoop aligned
on the alignment stitching at the bottom of
the pattern section sewn in step 2, and
then embroider the pattern.
→
Before the pattern section is
embroidered, alignment stitching is
sewn on the left side and at the top.
Make sure that this alignment
stitching aligns with the alignment
stitching sewn in step 3 and in step 2.
6.
Continue hooping the fabric and embroidering
until the entire embroidery pattern is sewn.