Brother PE-Design 6.0 Instruction Manual page 19

PeDesignV6Eng.book Page 11 Thursday, July 8, 2004 11:59 AM
For Windows Me: Select Specify the location
of the driver [Advanced], and then click
Next.
Select Removable Media (Floppy, CD-
ROM...), and then click Next.
For Windows 2000: Select Search for a
suitable driver for my device
[recommended], and then click Next.
Select CD-ROM drives, and then click Next.
Before Use
3.
Follow the instructions of the Found New
Hardware Wizard (or Add New Hardware
Wizard) to complete the installation of the
driver.
4.
Remove the CD-ROM from the computer's
CD-ROM drive.
11