Selecting The Underlay Type; Specifying The Underlay Density - Brother BES Lettering Instruction Manual

3 Select one or more of the following underlay types you want
to use: Contour, Perpendicular, Lattice, Full Lattice, Parallel,
or Zig-Zag.
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.
4 Adjust any of the other settings. Refer to the related
procedures for more information.
5 Click Apply.

Specifying the Underlay Density

You can specify the density for underlay stitches.
To set the underlay density:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Perpendicular, Lattice, Full Lattice, Parallel,
or Zig-Zag
4 In the Density box, enter a density value.
5 Adjust any of the other settings. Refer to the related
procedures for more information.
6 Click Apply.
Specifying the Underlay Stitch
Length
You can specify the stitch length for your underlay stitches. You
can increase or decrease the length according to your underlay
needs.
To specify the underlay stitch length:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
Text Properties 81