Scaling Patterns; Flipping A Pattern Horizontally Or Vertically - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 220 Thursday, July 8, 2004 11:59 AM
Programmable Stitch Creator

Scaling patterns

1.
Click on the Tool Box.
→ The motif stitch is selected.
2.
Move the pointer over one of the handles of
the pattern.
→ The shape of the pointer changes to
, ,
the handle that the pointer is over.
b
Memo:
• is for scaling the width.
• is for scaling the height.
• and
dimensions at the same time.
3.
Drag the handle to adjust the selected
pattern(s) to the desired size.
220
or , depending on
are for scaling both
Flipping a pattern
horizontally or vertically
You can flip selected patterns horizontally (up/
down) or vertically (left/right).
1.
Click on the Tool Box.
→ The motif stitch is selected, and
are available in the Toolbar.
2.
To replace the stitch pattern by its horizontal
mirror image (top and bottom inverted), select
Edit, then Mirror, then Horizontal, or click
in the Toolbar.
To replace the stitch pattern by its vertical
mirror image (left and right inverted), select
Edit, then Mirror, then Vertical, or click
in the Toolbar.
b
Memo:
To restore the image to its original
orientation, select the same menu command
again, or select the menu command Edit –
Undo.
and