Drawing Lines To Edit The Stitch Pattern - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 56 Thursday, July 8, 2004 11:59 AM
b
Memo:
• Double-clicking the file name also adds the
pattern to the work area and closes the
dialog box.
• To preview the available .pas files in the
selected folder, click Browse.
In the Browse dialog box that appeared,
click a stitch pattern to select it, and then
click Open (or double-click the pattern) to
open the file and to close both the Open
and Browse dialog boxes.
• Opening a .pas file (programmable fill
stitch pattern) automatically selects
Programmable Fill mode. Opening a .pmf
file (motif stitch patterns) automatically
selects Motif mode. To change the type of
stitch pattern to be created, use the
commands on the Mode menu.
→ The stitch pattern appears in the work
area of Programmable Stitch Creator.
a
Note:
You can see a preview of the stitch pattern in
the Preview window.
56
Creating and Editing Embroidery Patterns
Step 3
Drawing lines to edit the stitch
pattern
Now, we are going to draw a lines between the
displayed ones using the Line tool of the Tool Box.
b
Memo:
For this example, we will use the grid setting
Medium with which the stitch pattern was
saved. Grid settings should be selected
depending on how detailed you want to draw.
Select the grid setting Narrow for more
detailed stitches and the grid setting Wide for
more simple stitches. For more information
on the grid settings, refer to "Changing the
grid settings" on page 222.
1.
Click on the Tool Box. Move the pointer
over the work area.
→ The shape of the pointer changes to
.
2.
Move the pointer to the second vertical grid
line to the right of the leftmost wave, and then
click the top edge of the work area.
b
Memo:
The horizontal and vertical lines that you
draw on the work area always follow the grid.
The points that you create by clicking are
inserted at the intersection of the horizontal
and vertical grid lines, enabling you to draw
diagonal lines as well. Therefore, regardless
of where you click, a point will automatically
be inserted at the nearest intersection.
3.
Move the pointer parallel to the wave, and
then click the second vertical grid line to the
right of the corner in the leftmost wave.
b
Memo:
To remove the last point that was entered,
click the right mouse button.
4. 3.
Repeat step until you reach the end of the
wave, and then double-click the bottom edge
of the work area.
5. 2.
Repeat steps through
wave between the rightmost wave.
4.
to add another