Brother PE-Design 6.0 Instruction Manual page 134

PeDesignV6Eng.book Page 126 Thursday, July 8, 2004 11:59 AM
Layout & Editing
Sets the horizontal and vertical size of
the pattern.
Cross size
Range: 1.5 to 5 mm (0.04 to 0.39 inch)
Default: 2.5 mm (0.08 inch)
Sets the number of times that the
pattern will be sewn. Sews twice per
Stitch times time.
Range: Single, Double, Triple
Default: Single
Selects the thread chart for selecting
the thread color.
The most appropriate thread color from
Thread Chart
the selected thread chart is selected.
A user thread chart can also be
selected.
Sets the number of colors used in the
created pattern.
Max. The embroidery pattern is created using
Number of no more than the number of colors
Colors specified.
Range: 2 to 50
Default: 8
2.
Click Next.
→ A Cross Stitch Setting dialog box similar
to the one shown below appears.
3.
In the image in the dialog box, click the areas
to select whether or not they are to be sewn.
b
Memo:
• Areas not set to be sewn are shown filled
with a crosshatch pattern.
126
Inputting Images and Embroidery Patterns
4.
If necessary, in the Omit Colors list, click the
colors to select whether or not they will be
sewn.
5.
After selecting the desired settings, click
Finish.
→ The cross stitch pattern is created and
■
If Design Center is selected
→ Design Center starts up, and a Design
These areas
will not be sewn.
• To adjust the zoom ratio that the image is
displayed in, move the slider between
and .
• To return to the previous dialog box, click
Previous.
b
Memo:
Colors that are crossed out are set to not be
sewn.
displayed in the Design Page.
!!scr146.bmp!!
Page is displayed with the image import-
ed into it. For details, refer to "Design
Center" on page 69.