Moving To Sew Setting; Setting Sewing Attributes; Setting The Outlines - Brother PEDESIGN 5.0 Instruction Manual

Step 6

Moving to Sew Setting

1
Click on the menu bar, then click
Stage
You can also click the button of the Toolbar shown below:
The Sew Setting window appears.
In this stage, you can set and check the sewing attributes of each part of the pattern. You can also
set a pair of patterns for hole sewing in order to avoid sewing twice at the same place.
The other tools available are for zooming.
2
To zoom in and out, use the
the Figure Handle stage.
3
To maximize the Design Page so that it fits the window, click
Step 7

Setting Sewing Attributes

We are now going to apply sewing attributes to the different parts on the picture.
I

Setting the outlines

1
Click
The shape of the cursor changes to
of the Tool Box button.
The Sewing Attributes bar now looks like this:
To Sew Setting
and buttons on the Tool Box in the same way as you did at
on the Tool Box.
on the submenu.
To Sew Setting
on the Tool Box.
and is displayed together with a small figure
23