Using The Simple Text Tool; Changing The Font; Using The Monogram Text Tool - Brother BES-100E Workbook

Using the Simple Text tool (

This tool creates a block containing one or more horizontal lines of text.
To create a text shape using the
1
Click the
Simple Text
2
Click in the design area to specify the desired location for the left end of the baseline (1 in figure 24).
3
Click in the design area to specify the desired location for the right end of the baseline (2 in figure 24).
4
Click above the baseline to specify the desired height of the text (3 in figure 24). The
dialog box appears.
Properties
5
In the box, type the desired text.
Text
NOTE: To enter multiple lines of text, select the
information, see Entering multiple lines of text in chapter 1.
If multiple lines of text are entered, the specified baseline is the baseline position for the first line
of text.
6
Click the button.
OK

Changing the font

To change the font of a text shape:
1
Using the tool (
Move
appear around the shape.
2
Do either of the following:
Click the
Text Properties
appears. In the
In the drop-down list in the
Fonts

Using the Monogram Text tool (

This tool creates a one-, two-, or three-letter monogram with optional decoration.
To create a text shape using the
1
Click the
Monogram Text
2
Click in the design area to specify the desired location for the base of the center letter (1 in figure 25).
)
3
1
Simple Text
tool ( ) in the
Lettering
), select the text shape that you wish to change. "Dancing ants" (moving dashes)
button ( ) in the
drop-down list, select the desired font name, and then click the
Font
Text
Figure 25
2
1
Monogram Text
tool ( ) in the
Figure 24
tool ( ):
palette.
check box. A check mark will appear. For more
Multiline
bar. The
Text Text
bar, select the desired font name.
)
tool ( ):
palette.
Lettering
2
tab of the
Text Properties
Figure 26
tab of the
Text Text
dialog box
button.
OK
21