Checking The Pattern - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 205 Thursday, July 8, 2004 11:59 AM
Layout & Editing
• When the Optimize hoop change function
is selected, the sewing order that you have
set is optimized to reduce the number of
times that the hoop installation position is
changed.
For the example shown on page 204, the
sewing order is: a (pattern 1) → b (pattern
2) → a (patterns 3 & 5) → c (patterns 4 & 6)
If the Optimize hoop change function is not
selected, each pattern is sewn according
to the sewing order that you have set.
Therefore, since the number of times for
changing the hoop installation position is
not optimized, it may be changed more
often than if it was optimized.
For the example shown on page 204, the
sewing order is: a (pattern 1) → b (pattern
2) → a (pattern 3) → c (pattern 4) → a
(pattern 5) → c (pattern 6)
a
Note:
Since the pattern may not be sewn correctly
or the fabric may not feed evenly if the hoop
installation position is changed too often, we
recommend selecting the Optimize hoop
change function. Selecting this function will
change the sewing order that you have set,
therefore, check the sewing order before you
begin embroidering.
Information for Optional Large-Size Hoop Users

Checking the pattern

a
Note:
Make sure that no pattern has been selected
before clicking this command. If a pattern
has already been selected, only the
information for that pattern is displayed.
1.
Click Option, then Design Property.
→ At the same time that the Design Proper-
ty dialog box appears, the Design Page is
automatically enlarged or reduced to fit in
the entire window.
b
Memo:
• The first line of the dialog box shows the
position in the hoop installation order for
the currently displayed pattern.
• Only the patterns that would be sewn at
the current position in the hoop installation
order appear in the Design Page, and the
embroidering area for the current hoop
position is outlined in red.
• To display information for patterns at other
positions in the hoop installation order,
click Previous or Next. At this time, the
corresponding pattern and hoop position
appear in the Design Page.
205