Selecting The Underlay Type; Specifying The Underlay Density - Brother Pacesetter Embroidery Lettering Instruction Manual

Selecting the Underlay Type

You can select underlay types for various types of stitches.
Choose from Contour, Parallel, or Zig-Zag. You can combine
underlay types to get maximum coverage
Note that not all underlay types will be available for every font.
To select an underlay type:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Parallel, or Zig-Zag.
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.
4 Adjust any of the other settings. Refer to the related
procedures for more information.
5 Click Apply.

Specifying the Underlay Density

You can specify the density for underlay stitches.
To set the underlay density:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Parallel, or Zig-Zag
4 In the Density box, enter a density value.
5 Adjust any of the other settings. Refer to the related
procedures for more information.
6 Click Apply.
Text Properties
.
59