Table of Contents
Advertisement
PeDesignV6Eng.book Page 40 Thursday, July 8, 2004 11:59 AM
1.
In Design Center, click File on the menu bar,
and then click Open.
→ An Open dialog box similar to the one
shown below appears.
2.
Select Design Center PEM File (*.PEM) in
the Files of type box, the sample file
Flower.pem in the Data folder, and then click
Open.
b
Memo:
If the Preview check box is selected, the
contents of the selected file will appear in the
Preview box.
a
Note:
Be sure to select a .pem file saved in stage
4 (Sew Setting stage).
You cannot import another file type from
Design Center.
→ The embroidery pattern is displayed in the
Design Page of Design Center.
3.
Click Option on the menu bar, and then click
Layout & Editing to display the Layout &
Editing window.
4.
In Layout & Editing, click File on the menu bar,
point to Import, and then click from Design
Center on the submenu.
40
Creating and Editing Embroidery Patterns
An alternate method is to click the Toolbar
button indicated below.
from Design Center
→ The Import size dialog box appears.
5.
In the Magnification box, type or select 70%,
lick
.
and then c
Import
→ The embroidery pattern is imported into
the Design Page of Layout & Editing.
b
Memo:
• The dotted line and the handles that
appear around the embroidery pattern
show that the pattern is selected.
• The status bar shows the dimensions
(width and height) of the selected pattern.
Step 2
Adjusting the size and position
of the embroidery pattern
When you import a pattern from Design Center,
Layout & Editing puts the pattern at the center of
the Design Page. We are now going to change the
size of the imported pattern and move it to a
different location.
1.
Click
on the Tool Box.
→ The shape of the pointer changes to
.
Handles
Hide quick links:
Advertisement
Table of Contents
