E-Stitch, V-Stitch; E/V Stitch - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 173 Thursday, July 8, 2004 11:59 AM
Layout & Editing

E/V stitch

Selects the E stitch or V stitch.
Interval
Stroke width
Run pitch
E Stitch
V Stitch
Run time(s)
Stroke times
Arrange
■
Region sewing attributes
The available attributes differ depending on the selected sew type.
Satin stitch
Under sewing
Density
Gradation
Direction
Sets the distance between stitches.
Range: 1.0–20.0 mm (0.04–0.79 inch)
Default: 5.0 mm (0.20 inch)
Sets the pattern height (the direction per-
pendicular to the line).
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.5 mm (0.10 inch)
Sets the pitch of the line sewing.
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Sets the reverse stitching for the running stitches. With the V stitch, the "V" is
included in the run times.
Range: 1, 3, 5
Default: 1
Sets the number of strokes of the yarn carrier.
Available only if E Stitch is selected.
Range: 1–3
Default: 1
Sets the inside/outside arrangement of
the E stitch or V stitch.
Sets underlay stitching on or off. Try to use underlay stitching for wide areas, in order to pre-
vent shrinking during stitching. Depending on the shape of the region, however, it may not be
possible to select this setting.
On: Underlay stitching will be sewn.
Off: Underlay stitching will not be sewn.
Sets the number of lines per millimeter.
Range: 1–7 lines per mm (25–178 lines per inch)
Default: 4.5 lines per mm (114 lines per inch)
Sets the density gradation setting on or off.
Available when the type of sewing direction is set to Constant.
Click Pattern to set the gradation pattern.
Default: Off
For details on this attribute, refer to"Creating a gradation" on page 179.
[Type] Specifies the type of sewing direction.
Constant: Sews at a fixed angle. The angle is specified by the angle setting.
Variable: Varies the sewing direction according to the object being sewn.
[Angle] Specifies the sewing angle.
Available only when the sewing direction type is
set to Constant.
Range: 0–359 degrees
Default: 45 degrees
Editing Embroidery Patterns
E stitch V stitch
E stitch V stitch
E stitch V stitch
E stitch V stitch
90°
135°
180°
225°
270°
45°
0°
315°
173