Brother PE-Design 6.0 Instruction Manual page 126

PeDesignV6Eng.book Page 118 Thursday, July 8, 2004 11:59 AM
Layout & Editing
b
Memo:
To close the dialog box without applying the
changes to the settings, click Cancel.
3.
In the Select Mask dialog box, click Next.
→ The image is analyzed, and the Check
Mask Shape dialog box appears.
b
Memo:
Areas not set to be sewn are shown filled
with a crosshatch pattern.
4.
Click Next.
→ The Photo Stitch 1 Parameters dialog
box appears.
118
Inputting Images and Embroidery Patterns
5.
Specify the settings for creating the
embroidery pattern.
b
Memo:
• To return to the previous dialog box, click
Previous.
• To quit the operation and close the dialog
box, click Cancel.
Sewing Option
Specifies how detailed the created
embroidery pattern will be. Selecting a
Detail setting closer to Fine creates more
details in the pattern and increases the
number of stitches.
Sets the sewing pitch. The pattern is
created with this setting value as the
Run pitch minimum length.
Range: 2 to 10 mm (0.08 to 0.39 inch)
Default: 3 mm (0.12 inch)
Select what parameter is given priority
when converting to embroidery pattern.
Stitch Quality: Creates a pattern while
giving priority to the stitching quality.
However, many jump stitches will result.
Conversion
Jump Stitch Reduction: Creates a
Priority
pattern while giving priority to reducing
the number of jump stitches in order to
reduce complications during
embroidering. However, the stitching
quality will be slightly reduced.
Image Type
If Photo is selected, the thread colors
will be mixed together, which will result
in a more natural look.
If Cartoon is selected, the thread colors
Photo/
will not be mixed together, which will
Cartoon
result in a more simply colored look.
Select Photo for image data from a
photograph, etc. Select Cartoon for
image data from an illustration, etc.
Design Page Color
If this check box is selected, the data for
the parts of the pattern that are the
same color as the Design Page will be
Sew Page
created. Clear the check box to keep
Color
the fabric the same color as the Design
Page.
Default: Selected