Brother PE-Design 6.0 Instruction Manual page 103

PeDesignV6Eng.book Page 95 Thursday, July 8, 2004 11:59 AM
Design Center
Motif stitch
Selects whether to use pattern 1 or pattern 2 for the motif stitch. If you choose to use both patterns, the data
is created to sew alternating rows of the two.
Pattern1 only: Uses only pattern 1 (Default)
Pattern2 only: Uses only pattern 2
Pattern1 and 2: Uses pattern 1 and pattern 2
Pattern1
Pattern 2
Motif
Direction
Row Offset
Run Pitch
Cross stitch
Size
Times
Concentric circle stitch, radial stitch and spiral stitch
For details on moving the center point of the concentric circle stitch and the radial stitch, refer to "Moving the
center point of the concentric circle stitch and radial stitch" on page 97.
Density
Run pitch
Select a pattern for the motif stitch.
Click , and then, in the Browse dialog box that appeared, select the
folder containing the .pmf file that you want to use. Double-click the desired
pattern, or select it, and then click OK.
Sets the pattern width (the direction along the line).
Width (hori-
Range: 2–10 mm (0.08–0.39 inch)
zontal length)
Default: 5.0 mm (0.20 inch)
Sets the pattern height (the direction perpendicular to the line).
Height (verti-
Range: 2–10 mm (0.08–0.39 inch)
cal length)
Default: 5.0 mm (0.20 inch)
H-Arrange
Sets the horizontal arrangement of the pattern. For
(horizontal
patterns like , the patterns will be arranged along
arrange-
the line as shown at the right.
ment)
V-Arrange
Sets the vertical arrangement of the pattern. For pat-
(vertical
terns like , the patterns will be arranged along the
arrange-
line as shown at the right.
ment)
Allows you to rotate the angle of the motif stitch.
Range: 0–359 degrees
Default: 0 degrees
Sets the amount of offset for each row.
Range: 0–10 mm (0.00–0.39 inch)
Default: 0.0 mm (0.00 inch)
Sets the pitch of the sewing.
Range: 1–10 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Sets the horizontal and vertical size of the pattern.
In Expert mode, the set value is converted automatically and displayed in the box for the other
measurement units.
Range: 1.5–5.0 mm (0.06–0.20 inch) or 5–17 counts
Default: 2.5 mm (0.10 inch) or 10 counts
Sets the number of times that the pattern will be sewn. Sews twice per time.
Range: Single, Double, Triple
Default: Single
Sets the number of lines per millimeter.
Range: 0.5–7.0 lines per mm (13–178 lines per inch)
Default: 2.0 lines per mm (51 lines per inch)
Sets the pitch of the line sewing.
Range: 1–10 mm (0.04–0.39 inch)
Default: 2.0 mm (0.08 inch)
Stage 4 (Sew Setting Stage)
Normal:
Mirror:
Alternate:
Normal:
Mirror:
Alternate:
90°
135°
180°
225°
270°
45°
0°
315°
95