Moving Entry/Exit Points And The Center Point - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 138 Thursday, July 8, 2004 11:59 AM
Layout & Editing
b
Memo:
If the point is on a curve, you can use the
control handles to adjust the curve.
Moving entry/exit points and
the center point
■
Moving the entry/exit points
You can reposition the entry and exit points of
objects created with the tools on the Tool Box in
order to adjust the stitching.
1.
Click on the Tool Box.
→ Two buttons appear:
2.
Click .
→ The shape of the pointer changes to
.
a
Note:
If the entry and exit points have been
optimized (a check mark appears in front of
the Optimize Entry/Exit points command
on the Sew menu), the entry and exit points
of the patterns cannot be edited. In order to
use this tool for editing the entry and exit
points, select the menu command Sew –
Optimize Entry/Exit points to cancel the
setting.
3.
Click the object that you want to edit.
→ The entry and exit points of the object ap-
pear.
b
Memo:
If the region has the concentric circle stitch or
radial stitch applied, the center point of the
stitching also appears. (For details on
moving the center point, refer to "Moving the
center point" on page 139.)
138
a
The entry and exit points of stitch data, text,
and manual punching patterns cannot be
edited.
This is the entry point for the outline
stitching. The previous pattern is
connected to this point.
This is the exit point for the outline
stitching. Stitching continues from this
point to the next pattern.
This is the entry point for the inside
region stitching. The previous pattern
is connected to this point.
This is the exit point for the inside
region stitching. Stitching continues
.
from this point to the next pattern.
b
If the outline or the inside region are set to
not be sewn, the corresponding point does
not appear.
4.
Drag the arrow for the point that you want to
move to the desired location on the outline.
a
• Only entry and exit points for objects
created with the Circle or Arc, Rectangle
and Outline tools can be edited. Stitch
data or objects created with the Text tools
or Manual Punch tools cannot be edited.
• If the menu command Sew – Optimize
Entry/Exit points is selected to optimize
the entry and exit points, all manual
adjustments of the entry and exit points
will be lost, and the positions of the points
will be automatically optimized.
Editing Embroidery Patterns
Note:
Memo:
Note: