Importing Image Data From The Clipboard; Changing The Display Settings Of Images - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 113 Thursday, July 8, 2004 11:59 AM
Layout & Editing
• To display the images of all parts
combined, select the Display With
Other Parts check box in the Part
Variations List dialog box that
appeared.
• Select a part from the list, and then
click OK.
5.
To select a part feature (for example, standard
size, slightly larger, slightly smaller, wider or
taller), move the Part Feature slider, if it is
available.
6.
To change the color of the parts, click the
Color tab, click the selector for the color that
you want to change, and then select the
desired color from the color list that appeared.
7.
Click OK.
→ The portrait image is displayed in the De-
sign Page.
b
Memo:
• If the image currently displayed in the
Design Page has not yet been saved, you
will be asked whether you want to save it.
• To display, hide, or display a faded copy of
the image that remains in the work area,
click Image, then Display Image, and
then click the desired display setting.
• To display the original image, click
On.
• To display a faded copy of the image,
click Faded.
• To hide the original image, click Off.
a
Note:
Only one image can be added to the work
area. If you try to display a different image, it
will replace the previous one.
Inputting Images and Embroidery Patterns
Importing image data from
the Clipboard
Image data can be imported into the Design Page
from the Clipboard. This allows you to import an
image without saving it first.
1.
Click Image, then Input, then from
Clipboard.
a
Note:
This can only be done when there is image
data on the Clipboard.
→ The image is displayed in the Design
Page.
b
Memo:
• The image is displayed with a resolution of
100 dpi for both the height and width.
• If the image currently displayed in the
Design Page has not yet been saved, you
will be asked whether you want to save it.
Changing the display
settings of images
The image that remains in the work area can be
displayed or hidden, or a faded copy of the image
can be displayed.
1.
Click Image, then Display Image, and then
select the desired setting.
To display the original image, click On.
To display a faded copy of the image, click
Faded.
To hide the original image, click Off.
b
Memo:
• This function is not available if no image
has been imported into the Design Page.
• Press the shortcut key (
between displaying the image to
displaying it faded to hiding the image.
) to switch
F6
113