Brother PE-Design 6.0 Instruction Manual page 137

PeDesignV6Eng.book Page 129 Thursday, July 8, 2004 11:59 AM
Layout & Editing
a
Note:
If a card writer module is connected but an
embroidery card is not inserted, the following
message appears.
• Insert an embroidery card, and then click
Retry.
• To quit the operation, click Cancel.
2.
After the card has been read, a dialog box
similar to the one shown below appears.
b
Memo:
This dialog box can be resized so that the
patterns can be viewed better. The size of
the dialog box is retained until it is changed
again.
3.
Click a pattern to select it.
Inputting Images and Embroidery Patterns
b
Memo:
• To see a more detailed image, select a
pattern, and then click Preview. A
Preview dialog box similar to the one
shown below appears.
• To import the displayed pattern, click
Import.
• To return to the Browse dialog box,
click Cancel.
• To quit the operation, click Cancel.
4.
Click Import, or double-click the pattern to
import it.
b
Memo:
When importing some patterns, the Select
Import size dialog box appears. If this
happens, select the desired import size, and
then click OK to import the pattern.
a
Note:
Due to copyright issues, some embroidery
cards cannot be used with this function.
129