Step3 Adjusting The Size And Position Of The Image; Step4 Automatically Converting The Image To An Embroidery Pattern - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 21 Thursday, July 8, 2004 11:59 AM
Automatically Creating Embroidery Patterns
Step 3
Adjusting the size and position
of the image
1.
Click Image on the menu bar, and then click
Modify.
→ Handles appear around the image.
b
Memo:
The status bar shows the dimensions (width
and height) of the image.
2.
Move the pointer over a handle.
→ The shape of the pointer changes to
, ,
on the handle that the pointer is over.
b
Memo:
• is for scaling the width.
• is for scaling the height.
• and
dimensions at the same time.
3.
Drag the handle to adjust the selected image
to the desired size.
4.
Move the pointer over the selected image.
→ The shape of the pointer changes to
Handles
Status bar
, or , depending
are for scaling both
.
5.
Drag the image to the desired location.
Step 4
Automatically converting the
image to an embroidery pattern
1.
Click Image on the menu bar, and then click
Image to Stitch Wizard.
An alternate method is to click the Toolbar
button indicated below.
Image to Stitch Wizard
→ The Select Stitch Method for Image dia-
log box appears.
2.
Select Auto Punch, and then click Next.
→ The image is analyzed, and the resulting
image is displayed in the Image Analysis
dialog box.
21