Step6 Saving The Embroidery Pattern - Brother PE-Design 6.0 Instruction Manual

PeDesignV6Eng.book Page 23 Thursday, July 8, 2004 11:59 AM
Automatically Creating Embroidery Patterns
b
Memo:
• To zoom in (or out), click
the Tool Box, and then click the desired
area of the embroidery pattern.
• To display, hide, or display a faded copy of
the original image, which remains in the
work area, click Image on the menu bar,
point to Display Image, and then click the
desired display setting.
• To display the original image, click
On.
• To display a faded copy of the image,
click Faded.
• To hide the original image, click Off.
2.
To display a realistic preview of the entire
embroidery pattern, click Display on the menu
bar, and then click Realistic Preview.
An alternate method is to click the Toolbar
button indicated below.
Realistic Preview
→ A realistic preview of the embroidery pat-
tern appears.
b
Memo:
To zoom in (or out), click
Tool Box, and then click the desired area of
the embroidery pattern.
a
Note:
The embroidery pattern cannot be edited
while the realistic preview is displayed.
3.
To leave the realistic preview display, repeat
2.
step , or press the
(or ) on
1.
2.
3.
(or ) on the
Esc key.
Step 6
Saving the embroidery pattern
Once the embroidery pattern is finished, you may
want to save it in order to retrieve it later.
Click File on the menu bar, and then click
Save.
An alternate method is to click the Toolbar
button indicated below.
→ If the pattern has already been saved at
least once, the file is saved immediately.
b
Memo:
To save the file with a different name, use the
menu command File – Save As instead.
→ If no file name has been specified or if the
file cannot be found, the Save As dialog
box appears.
Select the drive and the folder, and then type
in the file name.
Click Save to save the pattern.
b
Memo:
• To quit the operation, click Cancel.
• If a file already exists with the name
specified in the Save As dialog box, the
following message appears.
• To overwrite the file, click Yes. The
new file name appears in the title bar
of the Layout & Editing window.
• If you do not want to overwrite the
existing file, click No. You can then
enter a different file name.
Save
23