Brother PE-Design 6.0 Instruction Manual page 98

PeDesignV6Eng.book Page 90 Thursday, July 8, 2004 11:59 AM
Design Center
Beginner mode:
For line sewing
Expert mode:
For line sewing
b
Memo:
• An alternate method is to select the menu
command Sew – Setting Attribute, or
right-click a region or line.
• The sewing attributes displayed in the
dialog box depend on the selected sew
type.
2.
To display only basic sewing attributes and
simpler settings, click To Beginner mode.
To display all of the sewing attributes and
settings available for the selected sew type,
click To Expert mode.
90
For region sewing
3.
For region sewing
4.
5.
Stage 4 (Sew Setting Stage)
b
Memo:
• Settings that cannot be selected in
Beginner mode are retained from the
previous setting in Expert mode.
• To hide the preview box, click Hide Hint.
To display the preview box, click Show
Hint.
When the Hide Hint button is displayed,
the preview box is displayed, allowing you
to view a stitching sample when the pointer
is moved over the setting. The preview box
shows the setting changes that you make.
If necessary, change the sewing attributes
displayed under Line Sew or Region Sew.
b
Memo:
• In some cases, you may need to scroll
through the settings, or resize the dialog
box by dragging one of its corners in order
to view all of the sewing attributes.
• The method for entering settings varies
according to the attribute. When entering
numerical values in Expert mode, click the
arrow buttons to select the value or enter
the value directly. In Beginner mode, use
the slider to change the settings. If
appears, click the button to return to the
default setting.
c
For details on the different sewing
attributes and settings, refer to "Line
sewing attributes" on page 91 and
"Region sewing attributes" on page 91.
a
Note:
All settings made in the dialog box are
retained and will be applied regardless of the
mode, until they are changed.
When the line sewing attributes are displayed,
click an outline to apply the line sewing
attributes to the outline.
When the region sewing attributes are
displayed, click a region to apply the region
sewing attributes to the region.
Click Close to close the dialog box.