Moving To Sew Setting; Setting Sewing Attributes; Setting The Outlines - Brother PE-DESIGN2.0 Instruction Manual

Step 6

Moving to Sew Setting

1
Click on the menu bar, then click
Stage
You can also click the button of the Toolbar shown below:
The Sew Setting window appears.
In this stage, you can set and check the sewing attributes of each part of the pattern. You can also
set a pair of patterns for hole sewing in order to avoid sewing twice at the same place.
The other tools available are for zooming.
2
To zoom in and out, use the
the Figure Handle stage.
3
To maximize the Design Page so that it fits the window, click
Step 7

Setting Sewing Attributes

We are now going to apply sewing attributes to the different parts on the picture.

Setting the outlines

1
Click on the Tool Box.
The shape of the cursor changes to
Box button.
The Sewing Attributes bar now looks like this:
16
on the submenu.
To Sew Setting
and buttons on the Tool Box in the same way as you did at
and is displayed together with a small figure of the Tool
on the Tool Box.