Verify The Operating Status Of The Msa1500 Cs; View The Leds On The Msa1500 Cs - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Installation Procedures - All Deployments

Verify the operating status of the MSA1500 cs

To verify the operating status of the MSA1500 cs:

View the LEDs on the MSA1500 cs

Each module of the MSA1500 cs is equipped with LEDs.
To verify that your MSA1500 cs is operating properly, look for the following LED
patterns:
Table 7: MSA1500 cs Startup Status Lights
Power switch
Power supply module
Fan module
Fibre Channel I/O module (top LED)
SCSI I/O module (top LED)
If the above LED patterns are not illuminated:
50
View the LEDs on the MSA1500 cs
Read the messages on the controller display panel
LED
Check your cable connections between the device and the MSA1500 cs.
Check the availability of your power source.
Review the setup instructions in the previous sections of this guide.
Remove and reinsert the module.
Refer to the HP StorageWorks MSA1500 cs Maintenance and Service Guide,
included on the MSA1500 cs Documentation CD and available on the
Technical Documentation page of the MSA1500 cs web site at
http://www.hp.com/go/msa1500cs.
Condition
Amber = standby power
Solid green = power on
Solid green
Solid green
Solid green
Solid green
Modular Smart Array 1500 cs Installation Guide