Bgp Community List Settings - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide

BGP Community List Settings

This window is used to configure the matching rules for a BGP community list.
To view the following window, click L3 Features > BGP > BGP Community List Settings, as shown below:
The fields that can be configured are described below:
Parameter
List Name
Type
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
The fields that can be configured are described below:
Parameter
Mode
Regular Expression
Figure 5-135 BGP Community List Settings window
Description
Enter an Autonomous System path access list name.
Use the drop-down menu to select Standard or Expanded. Standard configures a
standard community list and Expanded configures an expanded community list.
Figure 5-136 BGP Community Rule Settings - View Detail window
Description
Use the drop-down menu to permit or deny the routes if rule is matched.
Enter the community set value. This value can be up to 80 characters long.
248