Changing The Default Settings - Dell 1815dn - All-in-one Laser Printer Owner's Manual

Press Scroll (
4
• Off: Prints in normal mode.
• Long Edge: Prints pages to read like a book.
• Short Edge: Prints pages to read by flipping over like a note pad.
If necessary, customize the copy settings including the number of copies, copy size, contrast, and
5
image quality by using the Copy menus.
Press Start ( ) to begin copying.
6
Your printer prints on both sides of paper automatically.

Changing the Default Settings

The copy options, including contrast, image quality, copy size, and the number of copies, can be set to
the most frequently used modes. When you copy a document, the default settings are used unless
changed using Copy menus.
NOTE:
While you set copy options, pressing Cancel (
status.
To create your own default settings:
Press Scroll (
1
OR
Press Scroll (
Press Scroll (
2
Press Scroll (
3
Press Select (
4
Change the setting using the Scroll (
5
Press Select (
6
Repeat steps 3 through 6, as needed.
7
Press Cancel (
8
56
Using Your Multi-Function Printer
) to select the binding option you want and press Select (
or
or ) to highlight Copy and press Select (
or ) to highlight Menu and press Select (
or ) to highlight Copy Defaults and press Select (
or ) to scroll through the setup options.
) to access the option you want to set.
) to save the selection.
) to return to Standby mode.
) cancels the changed settings and returns to the default
).
or ) or enter the value using the number keypad.
).
)
).