Scanning And Sending An Email - Dell 1815dn - All-in-one Laser Printer Owner's Manual

Scanning and Sending an Email

To use e-mail features such as Scanning to E-mail and Fax Forward to E-mail addresses, you first need to
configure the network settings and set up your e-mail account. See the
Make sure that your printer is connected to a network.
1
Load the document(s) face up with top edge in first into the ADF.
2
OR
Place a single document face down on the document glass.
For details about loading a document, see "Placing Documents on the Scanner Glass" on page 48 or
"Loading Documents Into the ADF" on page 49.
Press Scroll (
3
Press Scroll (
4
Press Select (
5
Enter your login ID and press Select (
6
Enter your login password and press Select (
7
Enter the recipient's email address and press Select (
8
NOTE:
You can enter a name you have stored in the Phone Book.
The display asks if you want to enter another address.
To enter additional address, press Scroll (
9
To continue to the next step, press Select (
The display asks if you want to review addresses.
10
To review addresses, press Select (
To continue to the next setup, press Scroll (
The display asks if you want to send the e-mail to yourself.
11
To send to your e-mail address, press Select (
Or, press Scroll (
Enter the email subject and press Select (
12
Press Scroll (
13
Select ( ).
Press Scroll (
14
Press Start ( ) or Select (
15
If the display asks if you want to log off your account, press Scroll (
16
press Select (
Press Cancel (
17
64
Using Your Multi-Function Printer
or ) to highlight Scan and press Select (
) to highlight Network and press Select (
or
) to access Email.
) to select Yes.
or ) to select No and press Select (
or ) to select the file type to which the scanned image will be converted and press
or ) to select the resolution you want and press Select (
). The printer begins scanning and then sends the email.
).
) to return to Standby mode.
).
).
).
).
or ) to select Add and repeat step 8.
) when Done appears.
or ) to select No and press Select (
) to select Yes.
).
).
User's Guide
.
).
).
).
) to select Yes or No and
or