Precautions When Installing Printer Accessories
Disconnecting the Power Cord:
Never remove the control board cover while the printer is plugged in.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or
removing ANY internal or external printer option.
Discharge of Static Electricity:
The control board and internal printer memory are sensitive to static electricity. Before installing or
removing an internal printer memory, discharge static electricity from your body by touching
something metal on any device plugged into a grounded power source. If you walk around before
finishing installation, discharge any static electricity once again.
Expanding Printer Memory
Additional printer memory is provided on a Dual In-line Memory Module (DIMM).
Your printer has 96 MB of memory. It can be expanded to 192 MB. Remove the preinstalled memory
DIMM before upgrading the memory.
Your printer supports only Dell DIMMs. Order Dell DIMMs online at www.dell.com.
Power the printer off and unplug all cables from the printer.
Grab the control board cover and open it.