If the document is jammed in the paper exit area:
Open the document cover and turn the release knob to remove the misfed documents from the
a
document output tray.
Close the document cover. Then load the documents back into the ADF.
b
If you cannot see the paper or the paper does not move when you pulled, open the document cover.
2
Turn the release knob so that you can easily seize the misfed document, and remove the document
3
from the roller or the feed area by carefully pulling it gently to the right.
Close the document cover. Then load the documents back into the ADF.
4
84
Troubleshooting