29 Performance Monitor Function
Monitoring S/W Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Perf Mon],Monitoring S/W,Enable 60sec,,Normal end,,,Seq.=xxxxx
[Perf Mon]
Performance Monitor function
Monitoring S/W
Monitoring Options operation
Enable 60sec
Enable 60sec is the selected parameter. The operation uses the following parameters, as shown
in
Table 227 (page
Table 227 Parameters for Monitoring S/W Operation
Parameter
Enable XXsec
Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Monitoring Switch (S/W) & CU Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Mon], Monitoring S/W & CU, Enable
Seq.=xxxxx
[Perf Mon]
Performance Monitor function
Monitoring S/W & CU
Monitoring Options operation
Enable 60sec
Enable 60sec is selected as the parameter. The operation uses the following parameters, as shown
in
Table 228 (page
Table 228 Parameters for S/W & CU Operation
Parameter
Enable XX sec
Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
187).
Description
Monitoring is enabled and the gathering interval is set as XX sec.
Monitoring is disabled.
187).
Description
Monitoring is enabled and the gathering interval is set as XX sec.
Monitoring is disabled.
60sec ,Normal end,,,
Monitoring S/W Operation 187