Upgrading The Firmware - HP D5970A - NetServer - LCII Installation Manual

Chapter 8
6. Move the light blue plastic levers as shown to fully seat the processor
module.
Move levers to upright position
to seat processor module.
Figure 8-5. Levers for Seating the Processor Module
NOTE Be sure that the VRM and the processor module associated
with it are both in primary or secondary slots.

Upgrading the Firmware

Load the HP NetServer Navigator CD-ROM and then power on the LPr. Follow
instructions to ensure that the BIOS is up-to-date.
Installing Additional Processors
VRM Connector Latch
57