HP D5970A - NetServer - LCII Installation Manual page 46

Hp netserver lpr installation guide
Hide thumbs Also See for D5970A - NetServer - LCII:
Table of Contents

Advertisement

Chapter 6
5. Remove the top cover from the NetServer. See Chapter 3 for details.
CAUTION
Wear a wrist strap and use a static-dissipating work surface
connected to the chassis when handling components. Ensure
that the metal of the wrist strap contacts your skin.
6. Locate the video memory chip sockets (see Figure 6-1).
7. Carefully remove the video memory chips from their packaging. One by
one, align the chips with the sockets, then push them down until they are
entirely flat.
NOTE
The video memory chips must be installed in pairs.
8. Reassemble the NetServer LPr.
NOTE
To get a higher resolution display, you may have to load
additional video drivers for the operating system. Refer to the
instructions that accompanied the video memory upgrade kit
as well as your NOS documentation.
Figure 6-1. Video Memory Upgrade Sockets
38
Installing Additional Video Memory
Video Memory Sockets
Align notch with socket

Advertisement

Table of Contents
loading

Table of Contents