Re-Installing The Nos; Removing A Processor Module - HP D5970A - NetServer - LCII Installation Manual

Chapter 8

Re-installing the NOS

You may have to re-install your Network Operating System in order to use the
additional processor. If you have gone from a uni-processor to multi-processor
configuration, check your NOS documentation or the Readme First file and
Configuration Advisor utilities on the HP NetServer Navigator CD-ROM.

Removing a Processor Module

Use the same procedure as above, and simply remove rather than add. BE SURE
to remove the associated VRM and replace the terminating resistor module .
58
Installing Additional Processors