Readying The Drive For Installation - HP D5970A - NetServer - LCII Installation Manual

Chapter 4

Readying the Drive for Installation

2. On the drive, press the locking latch in and pull the ejector handle out as
far as it can go, as shown in Figure 4 -3.
CAUTION
Be careful when you open the ejector handle. Extreme force
can snap off the handle.
Locking tab retracts
when the ejector
handle is open
Ejector Handle
Locking Latch
Figure 4-3. Readying the Drive for Installation
28
Installing Mass Storage Devices
Light Pipes
(fragile)