Readme First File; Viewing The Readme File; Configuration Assistant And Installation Assistant - HP D5970A - NetServer - LCII Installation Manual

Chapter 11
Documentation CD-ROM) to help you configure the NetServer. You can find
system optimization details in the Configuration Advisor.

Readme First File

This file includes more recent information that was not available at the time that
this installation document was printed. It is important to check this file before
proceeding with the installation.

Viewing the Readme File

1. Press the power-on button. Press the CD-ROM drive eject button. Place
the HP NetServer Navigator CD-ROM in the drive, and press the eject
button again to close the drive.
NOTE Using the low profile CD-ROM drive is slightly different than
full-height units. The disk drawer will spring out only part
way when you push the eject button. You must manually pull
the drawer open and manually close it after inserting a CD-
ROM.
Turn the power off, wait 10 seconds, and turn the power on again. If the
system fails to boot, follow the diagnostic instructions on the screen.
2. Go to the HP Navigator main menu. If the language needs to be changed,
select User Preferences and the language you want. You can also change
the language of the BIOS when prompted.
3. Select Readme File. The Readme file contains the latest information to
help you install your HP NetServer LPr. Read it carefully before beginning
your installation.

Configuration Assistant and Installation Assistant

HP Configuration Assistant guides you through the steps necessary to configure
the NetServer. Three methods of configuration are available: Express, Custom,
and Replicate.
HP Installation Assistant guides you through the NOS installation and configures
the NOS with the appropriate drivers for the HP-bundled configuration.
80
Configuring the NetServer LPr