Declaration Of Conformity (Us, Eu, Australia) - HP D5970A - NetServer - LCII Installation Manual

Appendix B

Declaration of Conformity (US, EU, Australia)

according to ISO/IEC Guide 22 and EN 45014
Manufacturer's/Supplier Name:
Manufacturer's/Supplier Address:
declares, that the product
Product Name:
Model Number(s):
Product Options:
conforms to the following Product Specifications:
Safety: IEC 950: 1991+A1, A2, A3, A4 / EN 60950: 1992+A1, A2, A3
EMC: CISPR 22:1993 / EN 55022:1994
EN 50081-1:1992 - Generic Emission
EN 50082-1:1992 - Generic Immunity
IEC 801-2:1991, 4 kV CD, 8 kV AD
IEC 801-3:1984, 3 V/m
IEC 801-4:1988, 0.5 kV Signal Lines, 1 kV Power Lines
FCC Title 47 CFR, Part 15
Supplementary Information:
1) The product was tested in a typical configuration with Hewlett-Packard peripherals.
2) Models were configured with a network interface board and shielded twisted-pair data cable.
3) The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
ì
This device may not cause harmful interference, and
ì
This device must accept any interference received, including interference that may cause
undesired operation.
The product herewith complies with the requirements of the foll owing directives and carries the CE marking
accordingly:
- EMC Directive 89/336/EEC including CE Marking Directive 93/68/EEC
- Low Voltage Directive 73/23/EEC
Santa Clara, August 30, 1998
North American Contact: Hewlett-Packard Company Product Regulations Manager
3000 Hanover Street, Palo Alto, CA 94304 Phone: 415-857-1501
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department ZQ / Standards Europe, Herrenberger Straße 130, D-7030 Böblingen (FAX: + 49-7031
DECLARATION OF CONFORMITY
Hewlett-Packard Company
5301 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
Network Server
HP NetServer LPr
ALL
Nigel Marrion/Regulatory Engineering Manager
Regulatory Information
119